TECNIA designs, builds and installs, wet scrubbers and systems based on this technology, when the gases and/or removed particles are corrosive, very hot or in special cases where the filter bag media may not support the removed pollutant.

All TECNIA's CHEMICAL WET SRUBBER models are specially sized and designed to absorb gaseous compounds, acid mists and odours through the counter-current flow of gases and scrubbing liquid over a packed section. This unit is meant to operate at a very low pressure drop, thereby reducing power consumption and energy costs. The design and location of internal parts eliminates gas channelling and assures trouble-free operation as there are no moving parts. All models are easily adapted to new or retrofit applications and no support structure is required.

Gases enter the CHEMICAL WET SRUBBER tower through a wide inlet area providing an even distribution of gases throughout the tower. Even distribution of the gases flowing counter-current with the scrubbing liquid increases contact time with the packing material, assuring the proper chemical reaction/absorption time needed to effectively remove contaminants from the gas stream.

TECNIA's CHEMICAL WET SRUBBER 3D design
3D internals view	3D top view	3D partial section view

Fields of Application

Wastewater treatment plants;
Pulp & paper;
Kraft process;
Black liquor recovery boilers;
Dissolving tanks;
Lime kilns, shakers & hydrators;
Bark & auxiliary boilers;
Evaporation vents;
Lime sludge kilns;
Ore dryers;
Carbon black plants;
Dyes manufacture;
Fertilizer plants;
Limestone plants;
Paper grinding;
Pelletizing operations;
Sintering plants;
Soda ash plants;

TECNIA's CHEMICAL WET SRUBBER are constructed of Stainless Steel assuring a superior resistance to the scrubbing liquid, contaminated gas flow, and even to outdoor atmospheric conditions.

TECNIA's CHEMICAL WET SRUBBER available models